LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis (Single Page) >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> 1996: MILLENIA, MPV, MX-5 MIATA, Protege & 1997: 626 (2.0L M/T, 2.5L), MX-6 (2.0L M/T, 2.5L), MILLENIA, MPV, MX-5 MIATA, Protege & 1998: MILLENIA, MPV, Protege & 1999-2000: MILLENIA, MX-5 MIATA >> Drive Cycle Procedure >> Drive Cycle-Mode 3

Drive Cycle-Mode 3

Start engine and warm to normal operating temperature. Ensure all electrical and A/C loads are off. Idle engine for additional 5 minutes. Drive vehicle at specified speed (V1) for one minute. Lower vehicle speed to specified speed (V2) for 3 minutes. SeeFig 1.

Fig 1: Drive Cycle-Mode 3 Vehicle Speed Table
G97I06609Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals