LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Drum >> Installation

Rear Brake Drum: Installation

  1. To install, reverse removal procedure. Apply lithium base grease to wheel cylinder and anchor sliding parts, adjuster threads and shoe contact points on backing plate.
  2. Install primary and secondary shoes in original positions (secondary shoe is longer). Adjust brake shoes. See REAR BRAKE SHOES  under ADJUSTMENTS. Bleed air from system. See BLEEDING BRAKE SYSTEM 
scientia non olet · About LEMON Manuals