LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Master Cylinder Push Rod >> 626

Master Cylinder Push Rod: 626

  1. Place Adjustment Gauge (49-F043-001 ) onto master cylinder. Turn screw on adjuster gauge until it contacts piston. Remove adjuster gauge. Apply 19.7 in. Hg to power brake unit.
  2. Invert adjuster gauge and place gauge on power brake unit. Adjust push rod on power brake unit until there is no clearance between push rod and adjuster gauge screw.
scientia non olet · About LEMON Manuals