LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1999 >> B2500 SX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Self-Diagnostics - EEC-V - 6.8L (99S E Series & 99S F350 To F550)) >> Self-Diagnostic System >> Retrieving Codes

Retrieving Codes

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, 1999 Mercury Mountaineer, and 1999 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.

Fault codes are retrieved from EEC-V system through Data Link Connector (DLC). See Fig 1. Self-diagnostic test procedures are for use with New Generation Star (NGS) scan tool. If a generic scan tool is used, ensure scan tool is certified to OBD-II standard.

DATA LINK CONNECTOR (DLC) LOCATIONS

Application Location
All Models Below Instrument Panel, Right Of Steering Wheel
Fig 1: Identifying Data Link Connector (DLC) Terminals
G95C12577Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals