LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1999 >> B2500 SX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Self-Diagnostics - EEC-V - 6.8L (99S E Series & 99S F350 To F550)) >> Quick Test >> Vehicle Preparation & Equipment Hookup >> New Generation STAR (NGS) Scan Tool

New Generation STAR (NGS) Scan Tool

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, 1999 Mercury Mountaineer, and 1999 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Ensure proper memory (EPROM) card is inserted into NGS scan tool. Connect service connectors of adapter cable to vehicle Data Link Connector (DLC) and the NGS scan tool. See Fig 1. Connect NGS scan tool power supply cable to power and go to KOEO ON-DEMAND SELF-TEST.

Fig 1: Identifying New Generation Star (NGS) Scan Tool
G94H32612Courtesy of FORD MOTOR CO.