Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Millenia

Front ⁽³⁾

Original Thickness

1.10 (28)

Minimum Thickness ⁽⁴⁾

1.02 (26)

Rear ⁽³⁾

Original Thickness

.37 (9.5)

Minimum Thickness ⁽²⁾

.29 (7.5)

MPV

Front ⁽¹⁾

Original Thickness

1.10 (28)

Minimum Thickness ⁽⁴⁾

1.02 (26)

Rear ⁽¹⁾

Original Thickness

.71 (18)

Minimum Thickness ⁽⁵⁾

.63 (16)

626

Front ⁽¹⁾

Original Thickness

.94 (24)

Minimum Thickness ⁽⁷⁾

.87 (22)

Rear ⁽¹⁾

Original Thickness

.39 (10)

Minimum Thickness ⁽⁸⁾

.31 ⁽⁸⁾

Protege

Front ⁽⁹⁾

Original Thickness

.87 (22)

Minimum Thickness ⁽⁶⁾

.79 (20)

Rear ⁽⁹⁾

Original Thickness

.35 ⁽⁹⁾

Minimum Thickness ⁽¹⁰⁾

.28 ⁽⁷⁾

⁽¹⁾	Maximum lateral runout is 0.004" (0.10 mm).

⁽²⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.33" (8.4 mm).

⁽³⁾	Maximum lateral runout is 0.002" (0.05 mm).

⁽⁴⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 1.06" (26.8 mm).

⁽⁵⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.66" (16.8 mm).

⁽⁶⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.82" (20.8 mm).

⁽⁷⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.90" (22.8 mm).

⁽⁸⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.35" (8.8 mm).

⁽⁹⁾	Maximum lateral runout is .002" (.50 mm).

⁽¹⁰⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is 0.31" (7.8 mm).