LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1998 >> Protege DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Rotor >> Installation

Rear Brake Rotor: Installation

  1. To install, reverse removal procedure. Apply lithium base grease to wheel cylinder and anchor sliding parts, adjuster threads and shoe contact points on backing plate.
  2. Install primary and secondary shoes in original positions (secondary shoe is longer). Adjust brake shoes. See REAR BRAKE SHOES  under ADJUSTMENTS. Bleed air from system.
Fig 1: Exploded View Of Rear Drum Brake Assembly (Protege Shown; 626 Is Similar)
G93C00846Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals