Removal & Installation
- Disconnect negative battery cable. Remove radio. Remove 2 screws and center instrument panel finish panel. Disconnect electrical connectors. Remove hood latch control handle and cable from lower steering column cover.
- Remove 2 screws and lower steering column cover. Remove 4 screws and steering column opening cover and reinforcement. Remove 3 screws and separate upper and lower steering column shrouds.
- Remove 5 screws and instrument cluster finish panel. Disconnect electrical connectors. Disconnect transmission range indicator thumbwheel (If equipped). Remove 4 screws and instrument cluster. Disconnect electrical connectors. To install, reverse removal procedure.