Fuel Gauge Sending Unit

WARNING: Relieve fuel pressure before servicing fuel system.

Remove fuel gauge sending unit. Connect ohmmeter between the following wire terminals of fuel gauge sending unit connector.
- Gray wire and Black/Orange wire.
Measure resistance with fuel gauge sending unit float in specified position. See FUEL GAUGE SENDING UNIT RESISTANCE . If resistance is not as specified, replace fuel gauge sending unit.

FUEL GAUGE SENDING UNIT RESISTANCE ⁽¹⁾

Float Position

Ohms

Fully Raised

1-5

Fully Lowered

103-117

⁽¹⁾	Resistance values and float positions are approximate.