LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> Protege DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (All Models)

Removal & Installation (All Models)

  1. Raise and support front of vehicle. Remove front wheel assemblies. Remove front disc brake caliper with brake hose connected. Wire caliper aside. Remove rotor-to-hub screws (if equipped). Remove rotor.
  2. Machine rotor if lateral runout exceeds specification. Replace rotor if measured thickness is less than specified minimum thickness. See DISC BRAKE SPECIFICATIONS  table. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals