LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> MX-6 LS, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (Except B2300, B3000 & B4000)

Removal & Installation (Except B2300, B3000 & B4000)

  1. Raise and support front of vehicle. Remove front wheel assemblies. Remove front disc brake caliper with brake hose connected. See FRONT DISC BRAKE CALIPER  . Wire caliper aside. Remove rotor-to-hub screws (if equipped). Remove rotor.
  2. Machine rotor if lateral runout exceeds specification. Replace rotor if measured thickness is less than specified minimum thickness. See DISC BRAKE SPECIFICATIONS  . To install, reverse removal procedure.
scientia non olet · About LEMON Manuals