LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> 626 ES, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Hub & Hub Spindle Assembly >> Removal & Disassembly (Disc Brake Model)

Removal & Disassembly (Disc Brake Model)

  1. Raise and support vehicle. Remove wheel assembly. Remove ABS wheel-speed sensor. Remove hub cap, lock nut and brake caliper. Remove disc plate. See Figure.
  2. Remove wheel hub component. Remove ABS sensor rotor. Remove hub bolt, wheel hub and dust cover. Remove hub spindle.
scientia non olet · About LEMON Manuals