Bushing Replacement (MPV 4WD)

Cut away front bushing inner collar. Using a vise and Remover/Installer (49-G033-102 and 49-F027-009), push out front bushing. Press out rear bushing using a press and Remover/Installer (49-U034-202 and 49-G026-103). To install front bushing, apply soapy water to bushing and use remover/installer to press in. Always install bushing from outer side of arm. Press in bushing until collar contacts arm. To install rear bushing, align arrows on bushing with marks on lower arm and use remover/installer to press in.