LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1997 >> 626 ES, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System (Except 626 2.5L) >> Removal & Installation >> Fail-Safe Relay & Motor Relay >> Removal & Installation (Protege)

Removal & Installation (Protege)

Disconnect negative battery cable. Relays are located behind left front headlight. See Fig 1 . Remove radiator grille. Disconnect headlight connector. Remove headlight mounting bolts and nuts. Remove headlight. Remove relay mounting bolt. Remove relay from vehicle. To install, reverse removal procedure. Check headlight adjustment.

Fig 1: Removing Fail-Safe Relay & Motor Relay (Protege)
G97D08743Courtesy of MAZDA MOTORS CORP.