Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Front ⁽¹⁾

Original Thickness

.94 (24)

Minimum Thickness ⁽²⁾

.87 (22)

Rear ⁽¹⁾

Original Thickness

.39 (10)

Minimum Thickness ⁽³⁾

.31 (8)

⁽¹⁾	Maximum lateral runout is .004" (.10 mm).

⁽²⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is .90" (22.8 mm).

⁽³⁾	If using a brake lathe to machine rotor on vehicle, minimum thickness is .35" (8.8 mm).