LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> Protege DX, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> NIPPONDENSO Rotary Vane >> Discharge Valve & Shaft Seal >> Installation

Discharge Valve & Shaft Seal: Installation

To install components, reverse removal procedure. Tighten compressor through-bolts to 19 ft. lbs. (26 N.m). Tighten discharge valve bolts to 41 INCH lbs. (4.6 N.m). Tighten discharge valve body and body through-bolts to 96 INCH lbs. (10.8 N.m).

Fig 1: View Of Nippondenso Rotary Vane Compressor (RX7 & Miata)
G94I10064Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals