LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> Protege DX, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL SOHC >> Removal & Installation >> Cylinder Head >> Installation

Cylinder Head: Installation

Install cylinder head gasket, cylinder head assembly and bolts. Tighten cylinder head bolts in 2 steps and in sequence to specification. See Fig 1. See TORQUE SPECIFICATIONS. To complete installation, reverse removal procedure.

Fig 1: Cylinder Head Bolt Tightening Sequence
G94B47499Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals