MX-6 & 626: Installation
WARNING: This page is about a different car, the 1992 Mazda Navajo and 1992 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- To install transaxle, reverse removal procedure. Torque converter is correctly seated when distance between engine mating surface of converter housing and face of converter is .81"(21 mm).
- Tighten bolts to specification. See TORQUE SPECIFICATIONS . Install NEW clips on axle ends before installing axle shafts. Fill transaxle with required amount of fluid, and check for external leaks.