RX7 Removal & Installation: Installation
WARNING: This page is about a different car, the 1991 Mazda Navajo, 1991 Mazda MX-5 Miata, and 1991 Mazda 929. However, it is still accessible from the selected car via links, so may be relevant.
- Reverse removal procedure to install transmission. Torque converter is correctly seated when distance between engine mating surface of converter housing and edge of converter is at least 1.34" (34 mm).
- Tighten bolts to specification. See TORQUE SPECIFICATIONS TABLE at end of article. Fill transmission with proper amount of fluid.