NAVAJO Removal & Installation: Installation
WARNING: This page is about a different car, the 1991 Mazda Navajo, 1991 Mazda MX-5 Miata, and 1991 Mazda 929. However, it is still accessible from the selected car via links, so may be relevant.
- To install transmission, reverse removal procedure. Adjust shift linkage. Ensure converter is fully seated before installing transmission. Torque converter is correctly seated when distance between engine mating surface of converter housing and edge of converter drive lug is .43-.56" (10.9-14.2 mm).
- Tighten flexplate-to-converter bolts to specification. See TORQUE SPECIFICATIONS TABLE at end of article. Fill transmission with required amount of fluid, and check for external leaks.