B2200 & B2600i REMOVAL & INSTALLATION: Installation
WARNING: This page is about a different car, the 1991 Mazda Navajo, 1991 Mazda MX-5 Miata, and 1991 Mazda 929. However, it is still accessible from the selected car via links, so may be relevant.
- To install transmission, reverse removal procedure. Adjust shift linkage. Ensure converter is fully seated before installing transmission.
- Tighten flexplate-to-converter bolts to specification. See TORQUE SPECIFICATIONS TABLE at end of article. Fill transmission with required amount of fluid, and check for external leaks.