LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Servicing - A/T) >> Adjustments >> Gearshift Linkage >> MX-3, Protege & 323

MX-3, Protege & 323

WARNING: This page is about a different car, the 1992 Mazda Navajo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console. Place gearshift lever in "P" position. Loosen selector cable mounting bolts. See Fig 1 . Push selector lever against "P" range; hold it in this position.
  2. Tighten selector cable mounting bolts. Ensure starter operates in "P" and "N" positions only. Ensure position of gearshift lever and indicator correspond with each other.
  3. Ensure lock button returns after it has been depressed. Ensure gearshift lever operates smoothly when engaged in all positions. Install center console.
Fig 1: Adjusting Gearshift Position (MX-3, Protege & 323)
G91I01536Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals