LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Servicing - A/T) >> Overdrive Brake Band Adjustments >> NAVAJO

Overdrive Brake Band Adjustments: NAVAJO

WARNING: This page is about a different car, the 1991 Mazda Navajo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean dirt from band adjusting screw area. Remove and discard adjusting screw lock nut. Install new lock nut. Tighten adjusting screw to 120 INCH lbs. (14 N.m). See Fig 1.
  2. Back off adjusting screw 2 turns. Hold adjusting screw in position and tighten new lock nut to 35-40 ft. lbs. (48-54 N.m).
NOTE: Navajo overdrive band adjustment procedure can be used for intermediate band adjustment as well. See Fig 1.
Fig 1: Adjusting Overdrive or Intermediate Band (Navajo)
G121169Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals