LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Servicing - A/T) >> Gearshift Linkage Adjustments >> NAVAJO

Gearshift Linkage Adjustments: NAVAJO

WARNING: This page is about a different car, the 1991 Mazda Navajo. However, it is still accessible from the selected car via links, so may be relevant.
  1. With engine off and parking brake applied, place shift lever in "OD" position. Hang an 8-lb. (3.6 kg) weight on selector lever. From below vehicle, pull down lock tab on shift cable and remove fitting from manual lever ball stud.
  2. Position manual lever in "OD" position by moving lever completely rearward (counterclockwise), and then moving it 3 detents forward (clockwise). Connect cable end fitting to manual lever.
  3. Push up on lock tab to lock cable in adjusted position. Remove weight from selector lever. Move lever through all positions, ensuring transmission is at full detent in each position.
scientia non olet · About LEMON Manuals