Stall Speed Test
- Connect tachometer to engine. Depress brake pedal firmly.
- Shift to transmission range to be tested. Accelerate engine to full throttle. When engine RPM stabilizes, take reading. DO NOT hold at full throttle more than 5 seconds. Idle engine one minute between tests. Perform test in all transmission ranges. Compare with STALL SPEED SPECIFICATIONS table.
CAUTION:
Stall speed test generates very high temperatures. NEVER hold throttle wide-open for more than 5 seconds. DO NOT
test more than 2 gears without idling engine to cool off fluids.
STALL SPEED SPECIFICATIONS
| Application | Stall RPM | |
|---|---|---|
| B2200 | ||
| Carbureted | 1800-2200 | |
| EGI Fuel Injection | 1850-2250 | |
| B2600 | 2100-2500 | |
| Miata | ||
| 1990-93 | 1900-2100 | |
| 1994 | 2750-3150 | |
| MPV | 1800-2200 | |