LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis - N4A-El/Hl & NC4A-El >> Self-Diagnosis (1994 MIATA Only) >> Retrieving Fault Codes >> OEM Tester Hook-Up

OEM Tester Hook-Up

  1. Use manufacturer's instructions on connecting Self-Diagnosis checker and SST, selector and tester harness to vehicle. Connect Self-Diagnosis checker and SST to DLC.
  2. Set system selector system select switch to position 2. Set test switch to SELF TEST position. See Fig 1
Fig 1: Identifying System Selector Switch Positions
G95E19764Courtesy of MAZDA MOTORS CORP.
NOTE: If using aftermarket scan tester, follow manufacturers procedures.
scientia non olet · About LEMON Manuals