LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis - N4A-El/Hl & NC4A-El >> Electrical Component Tests >> 4-3 Switch >> Continuity

4-3 Switch: Continuity

Disconnect the connector. Check continuity between terminals "A" and "B" when tip of switch is depressed .14-.18" (3.5-4.5 mm). See Figure . If continuity is not present, replace 4-3 switch. If continuity is present, 4-3 switch is okay.

4-3 SWITCH VOLTAGE

Accelerator Pedal Voltage
About 7/8 Depressed About 12
Idle Position-To-5/8 Depressed Below 1.5