LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag Restraint System >> Disposal Procedures >> Scrapped Vehicle >> Passenger Air Bag

Passenger Air Bag

  1. Before deploying air bag, inspect operating condition of Deployment Tool (49 H066 002). See INSPECTING DEPLOYMENT TOOL  under DISPOSAL PROCEDURES. Ensure vehicle is outside and away from other vehicles and people. Open doors. Open convertible top (if equipped). Disconnect negative battery cable.
  2. Remove glove compartment. Disconnect Orange and Blue passenger air bag module connectors. See Figure. Connect deployment tool connector "A" to Orange and Blue passenger air bag connector. See Figure. Connect Red deployment tool clip to battery positive terminal. Connect Black deployment tool clip to battery negative terminal. Verify deployment tool Red light is on.
  3. Ensure all persons are at least 20 feet from vehicle. Press deployment tool activation switch to deploy air bag. Because of heat generated from air bag deployment, wait at least 15 minutes before handling deployed air bag module.
scientia non olet · About LEMON Manuals