Canceling & Activating Radio Anti-Theft: Canceling
- Obtain radio anti-theft code from vehicle owner. Turn ignition on. Push REW and FF until radio displays bars. Use channel preset buttons 1-4 to enter current code number.
- Use preset button 1 to enter first digit of code, preset button 2 to enter second digit of code, etc. After entering all 4 digits of code, press and hold REW and FF for approximately 2 seconds until a beep is heard.
- Radio will display CODE for approximately 5 seconds, then disappear to indicate radio is operative with anti-theft function by-passed. If radio displays ERR, repeat procedure.
NOTE:
If 3 consecutive errors are made during activation of radio anti-theft, radio will become completely inoperable. If this happens, contact Panasonic.