Canceling & Activating Radio Anti-Theft: Activating
- Turn ignition on. Press REW and FF until radio displays bars. While radio is displaying bars, use channel preset buttons 1-4 to enter code number.
- Use preset button 1 to enter first digit of code, preset button 2 to enter second digit of code, etc. After entering all 4 digits of code, press and hold REW and FF for approximately 2 seconds until a beep is heard.
- Radio will display COD with a backwards 9. This display will flash for 5 seconds, then disappear to indicate radio is operational with anti-theft activated. If radio displays ERR, repeat procedure.