LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL >> Overhaul >> Cylinder Head >> Valve Stem Oil Seals

Valve Stem Oil Seals

Use Installer Set (49-L012-0A0) to install valve seals. See Fig 1. Adjust installer dimension "L" to seal depth of .720-.744" (18.3-18.9 mm). Using hand pressure ONLY, install seal until it contacts cylinder head. Lightly oil valve seal lip.

Fig 1: Installing Valve Guide Seals
G94D47509Courtesy of MAZDA MOTORS CORP.
NOTE: Use only new exhaust valve guides to replace intake or exhaust valve guides.
scientia non olet · About LEMON Manuals