LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-3 Base, Automatic >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag Restraint System >> Disabling & Activating Air Bag System >> Canceling & Activating Radio Anti-Theft >> Canceling

Canceling & Activating Radio Anti-Theft: Canceling

  1. Obtain radio anti-theft code from vehicle owner. Ensure radio is turned off. Turn ignition switch to ACC position. Push SCAN and AUTO-M until radio displays bars. Use channel preset buttons 1-4 to enter current code number.
  2. Use preset button 1 to enter first digit of code, preset button 2 to enter second digit of code, etc. After entering all 4 digits of code, press and hold SCAN and AUTO-M for approximately 1.5 seconds until a beep is heard.
  3. Radio will display CODE for approximately 5 seconds, then disappear to indicate radio is operative with anti-theft function by-passed. If radio displays ERR, repeat procedure.
NOTE: If 3 consecutive errors are made during activation of radio anti-theft, radio will become completely inoperable. If this happens, contact Fujitsu Ten Service Co.
scientia non olet · About LEMON Manuals