LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-3 Base, Automatic >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag Restraint System >> Disabling & Activating Air Bag System >> Canceling & Activating Radio Anti-Theft >> Activating

Canceling & Activating Radio Anti-Theft: Activating

  1. Complete this step within 10 seconds or activating procedure will cancel. Ensure radio is turned off. Turn ignition switch to ACC position. Press SCAN and AUTO-M for approximately 1.5 seconds until radio displays COD with a backwards 9. Press SCAN and AUTO-M again until radio displays bars.
  2. While radio is displaying bars, use channel preset buttons 1-4 to enter code number. Use preset button 1 to enter first digit of code, preset button 2 to enter second digit of code, etc. After entering all 4 digits of code, press and hold SCAN and AUTO-M for approximately 1.5 seconds until a beep is heard.
  3. Radio will display COD with a backwards 9. This display will appear for 5 seconds, then disappear to indicate radio is operational with anti-theft activated. If radio displays ERR, repeat procedure. If an error is repeated 3 times, turn ignition off before retrying procedure.
scientia non olet · About LEMON Manuals