LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-3 Base, Automatic >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> NIPPONDENSO Rotary Vane >> Discharge Valve & Shaft Seal >> Removal

Discharge Valve & Shaft Seal: Removal

  1. Drain and measure compressor oil in compressor. Remove discharge valve body through-bolts. Remove discharge valve body bolts and body. Remove discharge valve plate and discharge valve.
  2. Remove compressor through-bolts. Remove front and rear housing (oil separator case). Remove pins and gaskets. Remove shaft seal from shaft. Press shaft seal plate off of front housing (head cover).
scientia non olet · About LEMON Manuals