LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> MX-3 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL >> Removal & Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

  1. Apply light oil coat to seal lip. Using a hammer and seal installer, tap seal into oil pump body until it is flush with edge of pump body. DO NOT bottom seal in pump body. Align keyway slots, and install crankshaft sprocket and Woodruff key with tapered side toward oil pump body. Install crankshaft sprocket bolt.
  2. Using Crankshaft Lock Tools (49-S120-710 and 49-B011-102), lock crankshaft sprocket into position. Tighten lock bolt to specification. See TORQUE SPECIFICATIONS.
  3. Install timing belt. See TIMING BELT under REMOVAL & INSTALLATION. Install timing belt covers, pulleys and drive belts. Reconnect negative battery cable, and ensure timing is correct.
scientia non olet · About LEMON Manuals