LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> 323 1.6 2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Anti-Lock Brake System) >> Diagnosis & Testing >> Component Testing >> Wheel Speed Sensor (Inspection)

Wheel Speed Sensor (Inspection)

WARNING: This page is about a different car, the 1994 Mazda MX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove wheel and tire assembly. Check wheel sensor for looseness and damage. Check clearance between wheel speed sensor and sensor rotor.
  2. Clearance should be .012-.043" (.30-1.10 mm). If clearance is not as specified, replace wheel speed sensor or sensor rotor as necessary.
scientia non olet · About LEMON Manuals