LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> 323 1.6 2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Suspension - Rear) >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

WARNING: This page is about a different car, the 1994 Mazda MX-3. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten drive axle lock nut to specification. See TORQUE SPECIFICATIONS  table. Stake drive axle lock nut. Check axial play. See WHEEL BEARING under ADJUSTMENTS.

scientia non olet · About LEMON Manuals