LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Testing >> Proportioning Valve

Proportioning Valve

  1. Connect 2 pressure gauges to proportioning valve. One to input port and other to output port. Bleed brake system. See BRAKE SYSTEM BLEEDING  . Depress brake pedal until pressure gauge reads as specified and check output pressure. See PROPORTIONING VALVE PRESSURE SPECIFICATIONS  .
  2. Depress brake pedal again, applying additional pressure. Recheck output pressure. See PROPORTIONING VALVE PRESSURE SPECIFICATIONS  . If output pressure is not as specified, replace valve.
PROPORTIONING VALVE PRESSURE SPECIFICATIONS

Application Inlet Pressure psi (kg/cm2 ) Outlet Pressure psi (kg/cm2 )
B2200 & B2600i 555 (39) 1138 (80) 512-598 (36-42) 853-939 (60-66)
Miata 427 (30) 995 (70) 399-455 (28-32) 554-640 (39-45)
MPV 654 (46) 1422 (100) 626-682 (44-48) 860-1002 (60-70)
MX-3
DOHC
With ABS 356 (25) 853 (60) 328-384 (23-27) 512-598 (36-42)
Without ABS 284 (20) 853 (60) 256-312 (18-22) 355-441 (25-31)
SOHC 427 (30) 853 (60) 399-455 (28-32) 512-598 (36-42)
MX-6 & 626
With ABS 427 (30) 853 (60) 399-455 (28-32) 512-598 (36-42)
Without ABS 427 (30) 995 (70) 399-455 (28-32) 554-640 (39-45)
Protege & 323
With Rear Drum 356 (25) 853 (60) 327-384 (23-27) 412-498 (29-35)
With Rear Disc 356 (25) 853 (60) 327-384 (23-27) 462-547 (33-39)
929
With ABS 569 (40) 853 (60) 527-611 (37-43) 598-711 (42-50)
Without ABS 427 (30) 853 (60) 399-455 (28-32) 541-654 (38-46)