LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Shoes & Wheel Cylinders >> Removal (B2600i 4WD & MPV)

Removal (B2600i 4WD & MPV)

  1. Raise and support vehicle. Remove rear wheel assemblies. Remove brake drum. Machine or replace drum as necessary if inner diameter is not as specified. See DRUM BRAKE SPECIFICATIONS  .
  2. Release parking brake and disconnect parking brake cable. Note positions of primary and secondary hold springs and remove hold springs. Remove adjust lever, link, pull-off spring, shoe spring, return springs, and adjuster. See Figure . Note positions of primary and secondary shoes and remove brake shoes. Minimum brake shoe lining thickness is .04" (1 mm).
  3. Remove parking brake strut. Using Flare Nut Wrench (49-0259-770B), disconnect brake line from wheel cylinder. Remove wheel cylinder.
scientia non olet · About LEMON Manuals