LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (B2600i 4WD)

Removal & Installation (B2600i 4WD)

  1. Raise and support front of vehicle. Remove front wheel assemblies. Remove front disc brake caliper with brake hose connected. Support caliper using rope. Remove snap ring and spacer. Remove set bolts and bearing set plate.
  2. Using Wrench (49-S231-635), remove bearing lock nut. Remove rotor and hub assembly. Mark rotor-to-hub position. Separate rotor from hub. Machine rotor if lateral runout exceeds specification. Replace rotor if measured thickness is less than specified minimum thickness. See DISC BRAKE SPECIFICATIONS  . To install, reverse removal procedure.
scientia non olet · About LEMON Manuals