LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> MX-6 DX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Rear Brake Shoes >> B2600i 4WD & MPV

B2600i 4WD & MPV

  1. Raise and support rear of vehicle. Remove rear wheel assemblies. Ensure parking brake is released. Remove plugs from rear of backing plate. Insert a screwdriver through hole for star wheel. Rotate adjuster in direction of arrow stamped on backing plate until wheel locks.
  2. Insert a drift through other hole in backing plate. Push pawl back from adjuster and back off adjuster 8-10 notches (13-15 notches on MPV). Ensure wheel rotates freely. Perform same procedure on both sides. Adjust parking brake.
NOTE: Self-adjusting rear brakes only require manual adjustment when brake shoe is replaced or operating lever is moved during service operations.
scientia non olet · About LEMON Manuals