LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> 323 SE, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Brake Rotor >> Removal & Installation (Miata)

Removal & Installation (Miata)

  1. Raise and support vehicle. Remove rear wheel assemblies. Remove rear brake caliper with brake hose connected. Support caliper using rope. Remove rotor-to-hub screws. Remove rotor.
  2. Machine rotor if lateral runout exceeds specification. Replace rotor if measured thickness is less than specified minimum thickness. See DISC BRAKE SPECIFICATIONS  . To install, reverse removal procedure.
scientia non olet · About LEMON Manuals