Removal & Installation (B2200, B2600i & MPV)

Remove horn pad. Remove steering wheel lock nut. Using a puller, remove steering wheel. To install, reverse removal procedure. Tighten steering wheel lock nut to specification. See TORQUE SPECIFICATIONS table at end of article.

WARNING: Before servicing Miata and 929, disconnect and shield negative battery cable. Use caution when working around steering column as air bag could deploy.

WARNING: Wait about 10 minutes after disabling air bag system before servicing. Air bag system voltage is maintained for about 10 minutes after system is disabled. Failure to wait 10 minutes before servicing system may cause accidental air bag deployment and possible personal injury.