Removal (B2200, B2600i & MPV)

With brake drum removed, remove brake shoe return springs, retaining springs and guide pins. See Fig 1 or Fig 2 . Remove brake shoes. Remove parking brake strut, and disconnect parking brake cable from operating lever of secondary shoe. Minimum lining thickness is .04" (1 mm).

Fig 1: Rear Drum Brake Assembly (B2200 & B2600i 2WD)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Rear Drum Brake Assembly (B2600i 4WD & MPV)

Courtesy of MAZDA MOTORS CORP.