LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1991 >> 626 LE, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (Miata, MPV, MX-6, Protege, RX7, 323 & 626)

Removal & Installation (Miata, MPV, MX-6, Protege, RX7, 323 & 626)

  1. Raise and support front of vehicle. Remove wheel. Remove caliper with brake hose connected. Support caliper using rope. Remove 2 rotor-to-hub screws. Remove rotor.
  2. Machine rotor if lateral runout exceeds specification. Replace rotor if measured thickness is less than specified minimum thickness. See DISC BRAKE SPECIFICATIONS  at end of article. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals