LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> RX-7 Turbo >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Axle Bearing & Oil Seal (Pickup) >> Removal (B2200 & B2600i)

Removal (B2200 & B2600i)

  1. Remove wheel and brake drum. Disconnect parking brake cable and brake line. Remove backing plate bolts. Remove backing plate and rear axle assembly. Using Holder (49 S120 645A) and Wrench (49 0603 635A), remove axle bearing lock nut.
    NOTE: Left wheel lock nut has left-hand threads.
  2. Using Puller (49 S120 520A) and Adapter (49 S120 523A), remove rear axle bearings. Remove oil seal from axle housing.
scientia non olet · About LEMON Manuals