Crash Sensors: Installation

To install, reverse removal procedure. Position sensor with arrow toward front of vehicle. Tighten mounting bolts to specification. See TORQUE SPECIFICATIONS table. Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG indicator light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.

To install, reverse removal procedure. Position sensor with arrow toward front of vehicle. Tighten mounting nuts to specification. See TORQUE SPECIFICATIONS table. Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG indicator light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.