LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> RX-7 Base, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Clutches >> Removal & Installation >> Clutch Damper (MPV 4-CYL) >> Removal & Installation (MPV 4-Cylinder)

Removal & Installation (MPV 4-Cylinder)

  1. Damper assembly is an in-line unit, mounted between clutch master cylinder and clutch release cylinder. Remove 2 damper cover bolts, securing it to mounting bracket.
  2. Disconnect fluid lines from damper and remove two mounting bolts. To install, reverse removal procedure. Damper is fitted with a bleed screw and should be bled after release cylinder. See Figure.
scientia non olet · About LEMON Manuals