Removal (B2200 & B2600i)
- Disconnect negative battery cable. Remove console and gear shift lever. Raise and support vehicle. Mark position of drive shaft flanges and remove drive shaft(s). Insert plug into transmission extension housing to prevent oil loss. Disconnect speedometer cable from transmission.
- On B2600i models, remove splash shield and transfer case cover. On all models, disconnect wiring harness. Remove return spring. Disconnect parking brake cables. Remove clutch release cylinder and gusset plate.
- Disconnect and move exhaust pipe aside. Support transmission and remove crossmember. Remove starter. Remove transmission-to-engine bolts. Remove transmission from vehicle. Remove clutch cover mounting bolts. Remove clutch cover and disc.