LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> RX-7 Base, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Servicing - A/T >> 2-4 Brake Band Adjust (MX-6, 626) >> MX-6 & 626

MX-6 & 626

  1. Remove drain plug and drain fluid. Remove oil pan and gasket. Loosen 2-4 band lock nut, while holding piston stem stationary. Tighten piston adjustment stem to 80-97 INCH lbs. (9-11 N.m).
  2. Back off piston adjustment stem 2 turns. While holding stem in this position, tighten lock nut to 18-29 ft. lbs. (25-39 N.m). Install oil pan with new gasket and tighten bolts to 71-97 INCH lbs. (8-11 N.m).
scientia non olet · About LEMON Manuals